快盈v3　　金属线条在家装中的运用已日渐流行，常见的有不锈钢条和铝合金金属条。金属装饰条除了是一个非常好的收边材料，更是一种具有画龙点睛功效的装饰用材。

快盈v3　　The use of metal lines in home decoration has become increasingly popular, commonly including stainless steel bars and aluminum alloy metal bars. Metal decorative strips are not only a very good finishing material, but also a decorative material with the finishing touch effect.

　　今天讲解金属线条在墙顶面运用的知识点，主要解决以下问题：

　　Today we will explain the knowledge points of using metal lines on the top of walls, mainly to solve the following problems:

　　1、金属线条的款式及尺寸。

　　1. The style and size of metal lines.

快盈v3　　2、金属线条的设计和施工注意事项。

快盈v3　　2. Design and construction precautions for metal lines.

　　01.

　　one

快盈v3　　金属线条常用有哪些款式？

　　What are the commonly used styles of metal wire?

　　首先我们需要明确的是：金属装饰线条的尺寸、颜色、形状是可以定制的。运用到墙顶面造型的金属线条常见的有：U型、平板、T型、几型和L型。

　　Firstly, we need to clarify that the size, color, and shape of metal decorative lines can be customized. Common metal lines used for wall top modeling include U-shaped, flat, T-shaped, multi shaped, and L-shaped.

　　1、U型金属线条

快盈v3　　1. U-shaped metal wire

　　当地量尺定做通常只能做到20㎜，而成品的能达到5㎜左右（视情况），运用常有2种情况：两边对等的U型和两边长短不一的U型。

快盈v3　　Local measuring tape customization can usually only achieve a thickness of 20mm, while finished products can reach around 5mm (depending on the situation). There are often two types of usage: U-shaped with equal sides and U-shaped with different lengths on both sides.

　　△两种U型金属线条

　　Two types of U-shaped metal lines

快盈v3　　两边对等的U型金属线条用于左右两边没有高低差的平面，可以购买成品或者现场量尺定做。而两边长度不一致的U型金属线条常用于左右两边有高低差的造型收口中，因为高低差的不确定性，故大部分需要现场量尺定做。

快盈v3　　The U-shaped metal lines on both sides are used for flat surfaces with no height difference on the left and right sides. They can be purchased as finished products or customized with on-site measuring scales. U-shaped metal lines with inconsistent lengths on both sides are commonly used in shaping closures with height differences on the left and right sides. Due to the uncertainty of height differences, most require on-site measurement and customization.

　　△U型金属条案例示意图

　　Schematic diagram of △ U-shaped metal strip case

　　2、平板金属线条

快盈v3　　2. Flat metal wire

　　平板金属线条运用得不多，有是完全平面的，也有两侧磨边的（磨边的常用于木饰面表面），常见宽度为10㎜、15㎜、20㎜、35㎜。

快盈v3　　Flat metal lines are not widely used, some are completely flat, while others have edges polished on both sides (commonly used for wood veneer surfaces), with common widths of 10mm, 15mm, 20mm, and 35mm.

快盈v3　　△平板金属条常见尺寸

快盈v3　　Common sizes of flat metal strips

　　a、用于吊顶凹槽

　　a、 Used for ceiling grooves

　　平面金属线条常运用在吊顶凹槽里或直接贴于木饰面上，因为是直接粘贴，用在顶面不用担心会被小孩抠掉或者不小心踢动.

　　Flat metal lines are often used in ceiling grooves or directly pasted on wooden veneers. Because they are directly pasted, there is no need to worry about being picked off or accidentally kicked by children when used on the top surface

　　但因为凹槽处涂料不好施工，常用U型金属线条取代（如果是深的凹槽，通常用比较宽的不锈钢片，如宽度200㎜的跌级吊顶中常用不锈钢片）。

　　But because the coating at the groove is not easy to apply, U-shaped metal lines are commonly used instead (if it is a deep groove, a wider stainless steel sheet is usually used, such as the stainless steel sheet commonly used in a 200mm wide drop ceiling).

　　平面金属线条用于浅凹槽示意如下：

　　The schematic diagram of using flat metal lines for shallow grooves is as follows:

　　△平板金属条用于吊顶小凹槽

快盈v3　　△ Flat metal strips are used for small grooves in suspended ceilings

　　b、用在木饰面上

快盈v3　　b、 Used on wooden veneers

　　如果用在木饰面上（墙面造型或柜门）则有松动的隐患，不常用也不建议，操作如下：

　　If used on wooden veneers (wall shapes or cabinet doors), there is a risk of loosening, and it is not commonly used or recommended. The operation is as follows:

　　① 打胶：把胶水点涂在线条背面。

　　① Glue application: Apply glue to the back of the line.

　　② 粘贴：把线条粘贴到需要装饰的地方。

　　② Paste: Paste the lines to the areas that need decoration.

　　③ 固定：用胶布固定到胶水干透。

　　③ Fixed: Use adhesive tape to fix until the glue is completely dry.

　　△平面金属线条施工示意

快盈v3　　Schematic diagram for the construction of flat metal lines

　　3、T型金属线条

　　3. T-shaped metal wire

　　T型金属线条款式有很多种，越细线条感越强，为了增加粘贴的稳固度，T型金属线条嵌入的部分通常设计成各种倒钩或者锯齿形状，尺寸及款式示意如下：

快盈v3　　There are many styles of T-shaped metal lines, and the thinner the lines, the stronger the feeling. In order to increase the stability of the paste, the embedded part of the T-shaped metal line is usually designed in various hook or sawtooth shapes. The size and style are shown below:

快盈v3　　△T型金属线条常见款式尺寸

　　Common styles and sizes of △ T-shaped metal lines

　　T型金属线条常用于：木门、柜门、背景墙、腰线以及墙面装饰等。

　　T-shaped metal lines are commonly used for wooden doors, cabinet doors, background walls, waistlines, and wall decorations.

　　在柜门上常用6㎜宽度，细节感更强，安装步骤大致是：在木板上开槽5毫米深，槽内打上玻璃胶固定。

　　On the cabinet door, a width of 6mm is commonly used, with a stronger sense of detail. The installation steps are roughly as follows: groove 5mm deep on the wooden board, and fix it with glass glue inside the groove.

　　△安装示意图

快盈v3　　△ Installation diagram

　　4、几型金属线条

快盈v3　　4. Several types of metal lines

快盈v3　　几型金属线条也常用于：木门、柜门、背景墙、腰线以及墙面装饰等。部分正反面都可以，突出面最窄尺寸亦能做到最小5㎜左右。

快盈v3　　Several types of metal lines are also commonly used for wooden doors, cabinet doors, background walls, waistlines, and wall decorations. Partial front and back sides are acceptable, and the narrowest size of the protruding surface can also be as small as about 5mm.

快盈v3　　△T型金属线条常见款式尺寸

快盈v3　　Common styles and sizes of △ T-shaped metal lines

快盈v3　　△T型金属线条用于墙板，亦可反过来使用

　　△ T-shaped metal lines can be used for wall panels or vice versa

　　5、L型金属线条

　　5. L-shaped metal wire

　　L型的金属线条常用在阳角包角的地方，直接粘上即可，但容易脱落不建议用。

快盈v3　　L-shaped metal lines are commonly used in the corners of the external corners and can be directly glued on, but they are not recommended as they are prone to detachment.

　　除了以上常用的金属线条，其他形状和尺寸有很多，比如斜面的、尖角的都可以定制。

　　In addition to the commonly used metal lines mentioned above, there are many other shapes and sizes that can be customized, such as inclined or pointed ones.

　　02.

　　two

快盈v3　　金属线条在设计和施工中有什么注意事项？

快盈v3　　What are the precautions for designing and constructing metal lines?

　　1、吊顶里的金属线条是怎么固定的呢？

快盈v3　　1. How are the metal lines fixed in the ceiling?

　　吊顶安装金属线条（常用U型）通常有内嵌式和外凸式2种。

快盈v3　　There are usually two types of metal lines (commonly U-shaped) for ceiling installation: embedded and protruding.

　　a、内嵌式

　　a、 embedded

快盈v3　　内嵌式安装完成效果通常是金属线条面与吊顶面齐平。如果线条较窄，可不用木条打底，如果线条宽大于15 mm，则需要木条打底，示意如下：

快盈v3　　The effect of embedded installation is usually that the metal line surface is flush with the ceiling surface. If the line is narrow, it is not necessary to use wooden strips as a base. If the line width is greater than 15mm, wooden strips are needed as a base. The schematic is as follows:

　　施工步骤及细节图如下：

　　The construction steps and detailed drawings are as follows:

　　① 安装预留尺寸：留槽一般深度为一层石膏板厚度（7-9mm），宽度通常做20mm。

　　① Installation reserved size: The depth of the reserved groove is generally one layer of gypsum board thickness (7-9mm), and the width is usually 20mm.

　　② 木工打底：木工开木条钉于槽内，注意左右两边预留缝隙打胶粘贴。

　　② Carpenter base: The carpenter cuts wooden strips and nails them into the groove, paying attention to leaving gaps on both sides and gluing them together.

快盈v3　　③打胶固定：金属条用胶嵌进槽内，安装后立即用美纹纸或胶带固定起来，待干透后将美纹纸或胶带取下。

　　③ Glue fixing: The metal strip is embedded in the groove with glue, and immediately fixed with masking paper or tape after installation. After it dries completely, remove the masking paper or tape.

　　b、外凸式

　　b、 Convex type

快盈v3　　外凸式安装则跟内嵌式相反，是贴于吊顶面表面的，一定需要木条打底，两者区别如下：

快盈v3　　External convex installation is the opposite of embedded installation, which is attached to the surface of the ceiling and requires wooden strips as a base. The difference between the two is as follows:

　　△内嵌与外凸金属条的对比

快盈v3　　Comparison between embedded and protruding metal strips

　　外凸式安装步骤如下：

　　The installation steps for convex installation are as follows:

快盈v3　　① 在吊顶顶面或者侧面安装木条，常用九厘板或大芯板开条，木条宽度比金属条宽度少3-5㎜，方便打胶固定：如金属线条是成品的20㎜宽，木条开条的尺寸建议为15㎜-17㎜宽。假设直接预留20㎜成品金属条的宽度，则很可能安装不上需要现场量尺定做。

　　① Install wooden strips on the top or side of the suspended ceiling, commonly using 9mm or large core boards for cutting. The width of the wooden strip is 3-5 mm less than that of the metal strip, making it easy to fix with glue. If the metal strip is 20mm wide of the finished product, the recommended size for cutting the wooden strip is 15mm-17mm wide. If the width of the 20mm finished metal strip is directly reserved, it is likely that it cannot be installed and requires on-site measurement and customization.

快盈v3　　△外凸金属条先用木条打底

快盈v3　　△ Use wooden strips as a base for the protruding metal strip

　　②打胶固定：金属条用胶嵌进槽内，安装后立即用美纹纸或胶带固定起来，待干透后将美纹纸或胶带取下。

　　② Glue fixing: The metal strip is embedded in the groove with glue, and immediately fixed with masking paper or tape after installation. After it dries completely, remove the masking paper or tape.

　　2、墙面的金属线条一般怎么运用？有什么注意事项？

　　2. How are the metal lines on the wall generally used? What are the precautions?

　　为了节省造价，很多设计师在做墙面造型时，只做了一点点不锈钢条造型，同顶面外凸式金属条施工工序一样，只需要木板开条，然后金属线条业主自购，效果如下：

　　In order to save costs, many designers only make a small amount of stainless steel strip design when creating wall shapes. Similar to the construction process of convex metal strips on the top, only wooden boards need to be cut and the metal lines are purchased by the owners themselves. The effect is as follows:

快盈v3　　但是这种效果比较考验墙面平整度，如果涂料师傅手艺不佳，侧面金属条容易显现出白色墙漆部分，很影响美观。

快盈v3　　However, this effect tests the flatness of the wall surface. If the paint master's skills are poor, the side metal strips may easily show white wall paint, which greatly affects the appearance.

快盈v3　　像上面这种金属线条有一侧是墙漆/墙纸墙布，建议木工完工、腻子打底之前安装好金属线条，以便后期涂料施工时能盖住金属线条的侧面。

快盈v3　　A metal line like the one above has one side coated with wall paint/wallpaper or wallpaper. It is recommended that the metal line be installed before the carpenter finishes and putty is applied, so that the side of the metal line can be covered during later coating construction.

　　如果金属线条两侧是木饰面、瓷砖、硬包等有厚度的材料，可以木工现场开条预留位置，后期安装不锈钢条。

　　If both sides of the metal line are made of thick materials such as wood veneer, ceramic tiles, hard packaging, etc., the carpenter can make a reservation on site and install stainless steel bars later.

　　△现场做的金属线条常不能同造型同平面

　　The metal lines made on site often cannot have the same shape and plane

　　墙面造型处的金属线条建议购买成品金属收口线，同造型一起安装。不仅不需要木条打底（节省半包造价），而且衔接处更加美观、贴合。如下图：

　　It is recommended to purchase finished metal closure wires for the metal lines on the wall design and install them together with the design. Not only does it not require wooden strips as a base (saving half the cost), but the joints are also more aesthetically pleasing and snug. As shown in the figure below:

　　△工字金属线条

　　△ I-shaped metal wire

　　△L金属线条

快盈v3　　△ L metal wire

　　△L金属线条

　　△ L metal wire

　　△墙面腰线金属线条

　　△ Wall waistline metal line

　　△阳角收口金属线条

　　△ External corner closing metal line

快盈v3　　在选购成品卡扣式的金属线条时，要注意造型材料的厚度，如果选择的尺寸不对会造成材料的浪费。

　　When selecting finished snap on metal lines, attention should be paid to the thickness of the shaping material. If the size chosen is incorrect, it will result in material waste.

　　△墙板还有更多款式的收口线条

　　△ There are more styles of closing lines for wall panels

　　3、金属线条可以做成圆弧等不规则尺寸的吗？

　　3. Can metal lines be made into irregular sizes such as arcs?

　　金属线条可以做成圆弧及造型款式，只是价格高一点而已。

快盈v3　　Metal lines can be made into arcs and shapes, but at a slightly higher price.

　　4、金属线条可以用在厨房卫生间吗？

　　4. Can metal wires be used in the kitchen and bathroom?

快盈v3　　金属线条可以用在厨房卫生间，但要选不容易生锈的材质，且选卡扣预埋式的金属线条，安装效果如下：

快盈v3　　Metal wire can be used in the kitchen and bathroom, but it is necessary to choose a material that is not easy to rust, and choose a snap in embedded metal wire. The installation effect is as follows:

　　5、想控制造价，但又想做点金属线条的元素，有什么办法吗？

　　5. Do you have any way to control the cost but also want to incorporate some metal line elements?

快盈v3　　金属线条打底的费用通常按米算，十几到二十几一米都有，多走个几圈轻轻松松上千块。但想节省造价又想安装金属线条，办法页是有的。

　　The cost of metal line base is usually calculated in meters, ranging from ten to twenty meters. Walking a few more laps can easily cost thousands of yuan. But if you want to save costs and also want to install metal lines, there are methods available.

　　① 可以让金属线条方打底，有些商家能包打底，只是换汤不换药，业主换一个地方付打底钱而已。

　　① Metal lines can be used as a base layer, and some merchants can provide a base layer, but they only need to change the soup without changing the medicine. Owners can pay for the base layer in a different place.

　　② 还可以让业主订购带PVC底座的金属线条。在吊顶平整度很好的底面和侧面无须开木条打底，直接可安装的，运用在墙面的时候，需要墙面平整度很高、或有打底。（但有反馈说容易坏）

快盈v3　　② Owners can also order metal lines with PVC bases. It can be installed directly on the bottom and sides of a ceiling with good flatness without the need for wooden strips as a base. When used on walls, it requires high wall flatness or a base layer. (But there is feedback that it is easy to break)

　　本文由 安徽不锈钢包口  友情奉献.更多有关的知识请点击  http://stjbjjd.cn/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

快盈v3　　This article is a friendly contribution from Anhui Stainless Steel Packaging For more related knowledge, please click http://stjbjjd.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.